GB/T 19242-2003 硫化橡胶 在压缩或剪切状态下蠕变的测定
作者:标准资料网 时间:2024-05-20 15:06:46 浏览:9750
来源:标准资料网
基本信息
| 标准名称： | 硫化橡胶 在压缩或剪切状态下蠕变的测定 |
| 英文名称： | Rubber,vulcanized—Determination of creep in compression or shear |
| 中标分类： |
化工 >>
橡胶制品及其辅助材料 >>
橡胶制品综合 |
| ICS分类： |
橡胶和塑料工业 >>
橡胶
|
| 发布部门： | 中华人民共和国国家质量监督检验检疫总局 |
| 发布日期： | 2003-07-03 |
| 实施日期： | 2004-01-01 |
| 首发日期： | 2003-07-03 |
| 作废日期： | 1900-01-01 |
| 主管部门： | 中国石油和化学工业协会 |
| 提出单位： | 原国家石油和化学工业局 |
| 归口单位： | 全国橡胶与橡胶制品标准化技术委员会 |
| 起草单位： | 西北橡胶塑料研究设计院 |
| 起草人： | 张美玲、朱伟、张德庆 |
| 出版社： | 中国标准出版社 |
| 出版日期： | 2004-01-01 |
| 页数： | 平装16开， 页数：11， 字数：23千字 |
| 书号： | 155066.1-20073 |
适用范围
本标准规定了硫化橡胶在持续压缩或剪切状态下测定蠕变的方法。本标准不适用于橡胶间断变形的试验。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 化工 橡胶制品及其辅助材料 橡胶制品综合 橡胶和塑料工业 橡胶
Product Code:SAE AMS3798/1
Title:Webbing, Low Modulus Aramid, 9/16 (14) Wide, 500 (2,224) Breaking Strength, Herringbone Twill, Resin Treated
Issuing Committee:Ams P Polymeric Materials Committee
Scope:This specification covers one width and one strength of low-modulus aramid webbing. This product has been used in construction of parachutes, but usage is not limited to such applications. 9/16 inch (14 mm) wide low-modulus aramid webbing having 500 pounds force (2,224 N) breaking strength.Product Code:SAE J2655
Title:Fastener Part Standard-Washers and Lock Washers (Inch Dimensioned)
Issuing Committee:Ship Systems - Fasteners Committee
Scope: This SAE Part Standard covers selected inch dimensioned washers and lock washers manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever washers of the covered materials are used. This standard permits the washers to be identified and ordered by a part of identifying number (PIN) as defined in this standard.The purpose of this document is to assist the designer and other personnel in providing requirements and part or identifying numbers for the most commonly used washers and lock washers. A part or identification number (PIN) is normally required for all military applications and provides a useful means of communicating washer and lock washer requirements to suppliers and manufacturers in a very succinct manner.
Rationale: This SAE Part Standard covers selected inch dimensioned washers and lock washers manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE standard covers material most often used in ship systems and equipment but its use may be applied wherever washers of the covered materials are used. This standard permits the washers to be identified and ordered by a part of identifying number (PIN) as defined in this standard.The purpose of this document is to assist the designer and other personnel in providing requirements and part or identifying numbers for the most commonly used washers and lock washers. A part or identification number (PIN) is normally required for all military applications and provides a useful means of communicating washer and lock washer requirements to suppliers and manufacturers in a very succinct manner.
